(Continued)
DescriptionField
Security Options
This information applies to the 2.4 GHz WiFi network.
If you change the WiFi security, select one of the following WiFi security options for the router’s WiFi network:
•
None. An open WiFi network that does not provide any security. Any WiFi device can join the WiFi network.
We recommend that you do not use an open WiFi network.
•
WEP. Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is
superseded by WPA-PSK and WPA2-PSK. The WEP option displays only if you select Up to 54 Mbps from
the Mode menu. For information about configuring WEP, see Configure
WEP Legacy WiFi Security on page
59.
•
WPA2-PSK [AES]. This option is the default setting. This type of security enables WiFi devices that support
WPA2 to join the router’s 2.4 GHz WiFi network. If you did not change the passphrase, the default passphrase
displays. The default passphrase is printed on the router label. WPA2 provides a secure connection but
some older WiFi devices do not detect WPA2 and support only WPA. If your network includes such older
devices, select WPA-PSK [TKIP] + WPA2-PSK [AES] security.
If you change the passphrase, in the Passphrase field, enter a phrase of 8 to 63 characters. To join the
router’s WiFi network, a user must enter this passphrase.
•
WPA-PSK [TKIP] + WPA2-PSK [AES]. This type of security enables WiFi devices that support either WPA
or WPA2 to join the router’s 2.4 GHz WiFi network. However, WPA-PSK [TKIP] is less secure than WPA2-PSK
[AES] and limits the speed of WiFi devices to 54 Mbps.
To use this type of security, in the Passphrase field, enter a phrase of 8 to 63 characters. To join the router’s
WiFi network, a user must enter this passphrase.
•
WPA/WPA2 Enterprise. This type of security requires that your WiFi network can access a RADIUS server.
For information about configuring WPA/WPA2 Enterprise, see Configure WPA/WPA2 Enterprise WiFi
Security on page 61.
Wireless Network (5GHz a/n/ac)
The SSID is the 5 GHz WiFi band name. If you did not change the SSID, the default
SSID displays. The default SSID is also printed on the router label.
Note: If you change the SSID, enter a 32-character (maximum), case-sensitive name
in this field.
Name (SSID)
User Manual55Manage the Basic WiFi Network
Settings
AC1000 WiFi Router Model R6080
To Next Page
Loading...
Need help?
General
