(Continued)
DescriptionField
From the Channel menu, select an individual channel for a 5 GHz SSID. The default
channel depends on your selection from the Region menu.
Note: In some regions, not all channels are available. Do not change the channel
unless you experience interference (shown by lost connections or slow data transfers).
If this situation occurs, experiment with different channels to see which is the best.
Note: If you use multiple WiFi access points (APs), reduce interference by selecting
different channels for adjacent APs. We recommend a channel spacing of four
channels between adjacent APs.
Channel
From the appropriate Mode menu, select one of the following modes for a 5 GHz
SSID:
•
Up to 87 Mbps. Legacy mode. This mode allows 802.11ac, 802.11n, and 802.11a
devices to join the selected WiFi network in the 5 GHz band of the network but
limits 802.11ac and 802.11n devices to functioning at up to 87 Mbps.
•
Up to 200 Mbps. Neighbor-friendly mode for reduced interference with
neighboring WiFi networks. This mode allows 802.11ac, 802.11n, and 802.11a
devices to join the selected WiFi network in the 5 GHz band of the network but
limits 802.11ac devices to functioning at up to 200 Mbps.
•
Up to 433 Mbps. Performance mode. This mode allows 802.11ac, 802.11n, and
802.11a devices to join the selected WiFi network in the 5 GHz band of the network
and allows 802.11ac devices to function at up to 433 Mbps. This mode is the default
mode.
Mode
User Manual56Manage the Basic WiFi Network
Settings
AC1000 WiFi Router Model R6080
To Next Page
Loading...
Need help?
General
