EasyManuals Logo

NETGEAR AC1200 R6220 User Manual

NETGEAR AC1200 R6220
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
Troubleshooting
152
AC1200 Smart WiFi Router with External Antennas
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Click the ADVANCED tab.
The ADVANCED Home screen displays.
5. In the Internet Port pane, click the Connection Status button.
The Connection Status screen displays.
6. Check the Connection Status screen to see if your PPPoE connection is working.
If the router is not connected, click the Connect button.
The router continues to attempt to connect indefinitely.
7. If you cannot connect after several minutes, the router might be set up with an incorrect
service name, user name, or password, or your ISP might be experiencing a provisioning
problem.
Unless you connect manually, the router does not authenticate using PPPoE until data is
transmitted to the network.
Troubleshoot Internet Browsing
If your router can obtain an IP address but your computer is unable to load any web pages
from the Internet, check the following:
Your computer might not recognize any DNS server addresses. A DNS server is a host
on the Internet that translates Internet names (such as www addresses) to numeric IP
addresses.
Typically, your ISP provides the addresses of one or two DNS servers for your use. If you
entered a DNS address during the router’s configuration, restart your computer.
Alternatively, you can configure your computer manually with a DNS address, as
explained in the documentation for your computer.
The router configured as the default gateway on your computer.
Reboot the computer and verify that the router address (www.routerlogin.net) is listed by
your computer as the default gateway address.
You might be running login software that is no longer needed. If your ISP provided a
program to log you in to the Internet (such as WinPoET), you no longer need to run that
software after installing your router. You might need to go to Internet Explorer and select
Tools > Internet Options, click the Connections tab, and select the Never dial a
connection. Other browsers provide similar options.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR AC1200 R6220 and is the answer not in the manual?

NETGEAR AC1200 R6220 Specifications

General IconGeneral
WiFi Technology802.11ac
WiFi PerformanceAC1200 (300 + 867 Mbps)
WiFi RangeMedium to large homes
Processor880 MHz processor
Antennas2 external antennas
USB Ports1 x USB 2.0
Memory128 MB flash and 128 MB RAM
SecurityWPA/WPA2
Number of Ethernet Ports5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)

Related product manuals