Specify Your Internet Settings
33
Nighthawk AC1900 Smart WiFi Router Model R7000
The screen adjusts:
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix
Length. The IPv6 address and prefix length of the router WAN
interface.
• Default IPv6 Gateway.
The IPv6 address of the default IPv6 gateway for the router’s
WAN interface.
• Primary DNS Server.
The primary DNS server that resolves IPv6 domain name
records for the router.
• Secondary DNS Server.
The secondary DNS server that resolves IPv6 domain
name records for the router.
Note: If you do not specify the DNS servers, the router uses the DNS servers
that are configured for the IPv4 Internet connection on the Internet Setup
screen. (See Manually Set Up the Internet Connection on page 23.)
7. Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
• Use DHCP Server.
This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
• Auto Config.
This is the default setting.
8. In the IPv6 Address/Prefix
Length fields, specify the static IPv6 address and prefix length
of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9. Click the Apply button.
To Next Page
Loading...
Need help?
General
