NETGEAR AC1900 Model R7000 User Manual

Share USB Drives Attached to the Router
66
Nighthawk AC1900 Smart WiFi Router Model R7000
Back Up Windows Computers with ReadySHARE Vault
Your router comes with free backup software for all the Windows computers in your home.
Connect a USB hard disk drive (HDD) to the USB port on your router for centralized,
continuous, and automatic backup.
 To back up your Windows computer:
1. Connect a USB HDD to a USB port on the router
.
For best performance, connect a USB 3.0 HDD to the blue USB 3.0 port on the front of
the router
.
2. Install the genie app on each Windows computer.
To download the genie app, visit www.netgear.com/genie.
3. Download ReadySHARE V
ault from www.netgear.com/readyshare and install it on each
Windows computer.
4. Launch ReadySHARE V
ault.
5. Use the dashboard or the Backup tab to set up and run your backup.
Control Access to the USB Drive
You can specify the device name, workgroups, and network folders for your USB device.
 To specify the USB access settings:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.

NETGEAR AC1900 Model R7000 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Very large homes
Processor	1GHz Dual Core
Antenna	3 external antennas
Beamforming+	Yes
Dynamic QoS	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
Dimensions	11.22 x 7.26 x 1.97 in (285 x 184.5 x 50 mm)
RAM	256 MB
Flash Memory	128 MB
WiFi Technology	802.11ac
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0, 1 x USB 2.0
Weight	1.65 lb (0.75 kg)