NETGEAR AC1900 Model R7000 User Manual

Share a USB Printer
94
Nighthawk AC1900 Smart WiFi Router Model R7000
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
printer connection.
 To turn off automatic NETGEAR USB Control Center startup:
1. Select T
ools > Configuration.
2. Clear the Automatically execute when logging on W
indows check box.
3. Click the OK button.
Your change is saved.
 To change the language:
1. Select T
ools > Configuration.
2. In the Language list, select a language.
3. Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.
 To specify the time-out:
1. Select T
ools > Configuration.
2. In the T
imeout field, type the number of minutes.
The time-out is the number of minutes that a computer holds its connection to the printer
when the connection isn’t being used.
3. Click the OK button.
Your change is saved.

NETGEAR AC1900 Model R7000 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Very large homes
Processor	1GHz Dual Core
Antenna	3 external antennas
Beamforming+	Yes
Dynamic QoS	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
Dimensions	11.22 x 7.26 x 1.97 in (285 x 184.5 x 50 mm)
RAM	256 MB
Flash Memory	128 MB
WiFi Technology	802.11ac
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0, 1 x USB 2.0
Weight	1.65 lb (0.75 kg)