Configure Advanced Features
134
AC1900, N900, and N450 WiFi Cable Data Gateways
7. In the Port Triggering Time-out field, enter a value up to 9999 minutes.
By default, the port triggering time-out is 10 minutes.
8. Click the Apply button.
Your settings are saved.
Set Up and Manage IP Address Filtering
By default, the cable data gateway allows any connected device access to the Internet. As an
added security measure, you can use IP filtering to block specific devices based on their IP
addresses from accessing the Internet.
Block or Schedule Blocking for Devices Based on IP Address
You must add each device for which you want to block Internet access based on IP address.
To block or schedule blocking for devices based on IP address:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > IP Filtering/MAC Filtering.
The IP Filtering / MAC Filtering screen displays.
To Next Page
Loading...
Need help?
General