Configure Advanced Features
142
AC1900, N900, and N450 WiFi Cable Data Gateways
Note: Be sure to change the cable data gateway default login password to a
secure password. For more information, see Change the Password
on page 25.
To set up remote management:
1. On your computer
, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser
, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Remote Management.
The Remote Management screen displays.
6. Select the Turn Remote Management On check box.
7. Specify the external IP address or addresses from which the cable data gateway can be
managed remotely:
• T
o specify access for a single IP address on the Internet:
a. Select the Only This Computer radio button.
b. Enter the IP address from which access is allowed.
To Next Page
Loading...
Need help?
General