Manage and Monitor Your Network
80
AC1900, N900, and N450 WiFi Cable Data Gateways
LAN Port
The settings of the LAN port. For information about how to configure the LAN settings, see Manage the LAN
Settings on page 46.
MAC Address The Media Access Control (MAC) address. This address is the unique physical
address that is assigned to the Ethernet LAN port.
IP Address The IP address that the Ethernet LAN port uses. The default IP address is
192.168.0.1.
DHCP Displays whether the DHCP server of the cable data gateway is enabled for
devices that are attached to the LAN.
Internet Port
The settings of cable Internet port. You cannot change these settings. Other than the MAC address, these
settings are assigned by the cable service provider.
MAC Address The Media Access Control (MAC) address. This address is the unique physical
address that is assigned to the cable Internet port.
IP Address/Mask The IP address and subnet mask (in the /xx format) that the cable Internet port
uses. If this field does not display an address or displays 0.0.0.0 as the address,
the cable data gateway cannot provide an Internet connection over the cable
Internet port.
Connection The type of network address, which is either a fixed IP address or an IP address
that the cable data gateway obtains dynamically from the DHCP server of the
cable service provider. In the latter case, the field displays DHCP Client.
Default Gateway The IP address of the cable service provider’s gateway that the cable Internet
port uses.
Domain Name Server The IP addresses of the Domain Name System (DNS) servers that the cable
Internet port uses.
Wireless Settings (2.4GHz)
The settings of the 2.4 GHz band of the main WiFi network. For information about how to configure the WiFi
settings, see
View or Change the Basic Settings for the Main WiFi Network on page 31 and Manage
Advanced WiFi Settings on page 109.
Name (SSID) The network name of the 2.4 GHz band of the main WiFi network.
Region The location (country). By default, the region is the United States.
Channel The channel that the 2.4 GHz band of the main WiFi network uses.
Mode The WiFi mode that the 2.4 GHz band of the main WiFi network uses. By
default, the mode is Up to 289 Mbps.
Note: The selected mode also applies to the 2.4 GHz band of the guest WiFi
network.
Wireless AP Displays whether the 2.4 GHz band of the main WiFi network is enabled. If the
2.4 GHz band is disabled, the 2.4 GHz WiFi LED on the front panel of the cable
data gateway is off.
Field Description
To Next Page
Loading...
Need help?
General