EasyManua.ls Logo

NETGEAR C7100V

NETGEAR C7100V
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Overview
12
AC1900 Cable Modem Voice Router
Install an Optional Battery
A battery is not included with the modem router, but you can purchase a NETGEAR modem
router battery (sold separately) and install it. The battery can give you five hours of additional
talk time and eight hours of idle time for voice service during a power outage. Battery access
is on the bottom of the modem router.
To install the battery:
1. Make
sure that the modem router is unplugged.
2. Open
the battery compartment door.
3. Insert
the battery into the modem router.
Do not attempt to remove the battery’s plastic tab. The plastic tab allows you to easily
remove the battery later if it must be replaced.
4. Close the battery compartment door.
Replace the Battery
Battery access is on the bottom of the modem router.
To replace the battery:
1. Unplug
the modem router.
2. Open
the battery compartment door.
3. Pull
the plastic tab to remove the battery.
4. Insert
the replacement battery and close the battery compartment door.

Table of Contents

Other manuals for NETGEAR C7100V

Related product manuals