Share USB Devices Attached to the Modem Router
46
AC1900 Cable Modem Voice Router
3. Enter the user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > USB Storage > Advanced Settings.
5. Specify access to the USB storage device:
• Network Device Name.
This is the name used to access the USB device connected
to the modem router. The default is readyshare.
• W
orkgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name is displayed here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
• Access Method. Select the check boxes for the access methods that you want:
- Network Neighborhood/MacShare. Enabled by default.
- HTTP. Enabled by default.
You can type
http://readyshare.routerlogin.net/shares to access the USB storage device.
- HTTP
(via Internet). Disabled by default. If you enable this feature, remote users
can type http://<public IP address/shares> (for example, http://1.1.10.102/shares)
or a URL domain name to access the USB storage device over the Internet. This
feature supports file uploading only.
- FTP. Disabled by default.
- FTP
(via Internet). Disabled by default. If you select this check box, remote users
can access the USB storage device through FTP over the Internet. This feature
supports both downloading and uploading of files.
6. If you changed the settings, click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
