Name: NETGEAR C7100V
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Specify Network Settings

AC1900 Cable Modem Voice Router

 To specify the pool of IP addresses that the modem router assigns:

1. Launch an Internet browser from a computer or mobile device that is connected to the

network.

2. T

ype http://www.routerlogin.net or http://www.routerlogin.com.

A login window opens.

3. Enter

the user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home page displays.

4. Select ADV

ANCED > Setup > LAN Setup.

5. Make sure that the Use Router as DHCP Server check box is selected.

6. Specify

the range of IP addresses that the modem router assigns:

a. In the Starting IP

Address field, type the lowest number in the range.

This IP address must be in the same subnet as the modem router.

b. In

the Ending IP Address field, type the number at the end of the range of IP

addresses.

This IP address must be in the same subnet as the modem router.

7. Click

the Apply button.

Your settings are saved.

The modem router delivers the following parameters to any LAN device that requests

DHCP:

• An IP address from the range that you defined

• Subnet mask

• Gateway IP address (the modem router’

s LAN IP address)

• DNS server IP address (the modem router’

s LAN IP address)

Other manuals for NETGEAR C7100V

Questions and Answers:

Need help?

Do you have a question about the NETGEAR C7100V and is the answer not in the manual?

General