Supplementary Information
40
CG3000DCR Advanced Cable Modem Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the rear panel of the gateway, press
and hold the Factory Defaults button
for over 7 seconds. The gateway resets, and
returns to its factory settings.
Your device returns to the factory configuration settings shown
in the following table.
Factory Default Settings
Gateway Login User login URL http://10.1.10.1
User name and password (case
sensitive)
MSO, D0nt4g3tme
admin, highspeed
Local Network
(LAN)
LAN IP 10.1.10.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 10.1.10.10
DHCP Ending IP address 10.1.10.199
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
con
nection
WAN MAC address Use default hardware address
WAN MTU size 1500
To Next Page
Loading...
