Specify Network Settings
43
ADSL2+ Gateway
4. Select Wireless.
5. To change the network name (SSID), type a new name in the SSID field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID is
randomly generated and is on the product label. If you change the name, make sure to
write down the new name and keep it in a safe place.
6. To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use dif
ferent
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
7. Click the Apply
button.
Your settings are saved.
If you connected wirelessly to the network and you changed the SSID, you are
disconnected from the network.
8. Make sure that you can connect wirelessly to the network with its new settings.
If you cannot connect wirelessly, check the following:
To Next Page
Loading...
