NETGEAR D2200D-1FRNAS - WPS Overview; Enable WPS Simple Config; Connect Using WPS

Specify Network Settings
49
ADSL2+ Gateway
WPS Overview
Wi-Fi Protected Setup (WPS) lets you add a wireless computer or device to your WiFi
network without typing the WiFi password.
Enable WPS Simple Config
To use WPS, you must enable WPS simple config first.
 To enable WPS connections (simple config):
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http:/192.168.254.254.
A login window opens.
3. Enter the user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The Main page displays.
4. Select W
ireless Settings > Simple Config.
5. Select the Enable Simple Config button.
The radio buttons are activated.
Connect Using WPS
 To connect using a WPS button:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http:/192.168.254.254.
A login window opens.
3. Enter the user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The Main page displays.
4. Select W
ireless Settings > Simple Config.
The Simple Config page displays.
5. Select the radio button for the setup method that you want to use:
DRAFT