Specify Network Settings
50
ADSL2+ Gateway
• Use Push Button method. Click the Begin Simple Config button.
• Use PIN entry method. In the Device PIN field, type the client security PIN and click
the Begin Simple Config button.
6. Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The gateway WPS page displays a confirmation message.
Control the Wireless Radios
The gateway has internal wireless radios that broadcast signals in the 2.4 GHz. By default,
they are on so that you can connect wirelessly to the gateway. You can turn the wireless
radios off and on. When the wireless radios are off, you can still use an Ethernet cable for a
LAN connection to the gateway.
To turn the wireless radios off and on:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http:/192.168.254.254
.
A login window opens.
3. Enter the user name and password.
To Next Page
Loading...
