Reference Manual for the ADSL Modem Wireless Router DG834G
7-20 Advanced Configuration
v1.3, March 2007
2. Verify the following for both access points:
• The LAN network configuration of the ADSL Modem Wireless Router and other AP
device are configured to operate in the same LAN network address range as the LAN
devices
• Both APs must be on the same LAN. That is, both the AP’s LAN IP address must be in the
same network.
• If using DHCP, both AP devices should be set to “Obtain an IP address automatically
(DHCP Client)” in the IP Address Source portion of the Basic IP Settings menu.
• Both AP devices use the same SSID, Channel, authentication mode, if any, and encryption
in use.
3. Verify connectivity across the LANs.
A computer on any LAN segment should be able to connect to the Internet or share files and
printers with any other PCs or servers connected to any of the three WLAN segments.
To Next Page
Loading...
