EasyManua.ls Logo

NETGEAR DG834G - Understanding ADSL Microfilters

NETGEAR DG834G
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Manual for the ADSL Modem Wireless Router DG834G
3-2 Configuring Your Internet Connection
v1.3, March 2007
The Internet Service Provider (ISP) configuration information for your ADSL account.
ISP Login Name and Password
ISP Domain Name Server (DNS) Addresses
Fixed or Static IP Address
ASDL microfilters as explained below.
Your computers set to DHCP.
Your ISP should have provided you with all the information needed to connect to the Internet. If
you cannot locate this information, you can ask your ISP to provide it.
Internet Configuration Requirements
Depending on how your ISP set up your Internet account, you need one or more of these
configuration parameters to connect your firewall to the Internet:
Virtual Path Identifier (VPI)/Virtual Channel Indentifier (VCI) parameters
Multiplexing Method
Host and Domain Names
Understanding ADSL Microfilters
ADSL technology uses the same wires as your telephone service. However, ADSL adds signals to
the telephone lines which create noise in the telephone service. You must use ADSL microfilters to
filter out these signals before they reach your telephone.
Note: If you purchased the modem router in a country where a microfilter is not included,
you must acquire one.

Table of Contents

Other manuals for NETGEAR DG834G

Related product manuals