8
Installing Your Router Using the
Smart Wizard
To use the Smart Wizard, you must be using a PC with Microsoft Windows 7, Windows Vista,
Windows XP, or Windows 2000 with Service Pack 2. The Smart Wizard setup procedure should
take about 15 minutes to complete. Before using the Smart Wizard to set up your wireless modem
router, ensure that:
• You have an ADSL Internet service connection through an Internet Service Provider (ISP).
• You have the configuration information provided by your ISP.
Using the Smart Wizard
The NETGEAR Smart Wizard takes you through the procedure to connect your router, ADSL
microfilters, and PC(s). It then helps you to configure your wireless settings and enable wireless
security for your network. The Smart Wizard guides you through the setup process by automating
many of the steps. At each step in the setup process, the Smart Wizard checks to ensure that the
steps you perform are successfully completed.
To install your router using the Smart Wizard:
1. Locate the ADSL settings information provided by your Internet Service Provider.
2. Insert the Resource CD into your Windows PC. The CD will automatically start and detect the
language you are using on your PC. Select a different language option, if you prefer.
3. When the Welcome screen appears, click Setup to start the Smart Wizard. Follow the
instructions and prompts to complete the installation.
If the CD does not automatically start, browse the CD and double-click on .
To Next Page
Loading...
Need help?
General
