Virtual Private Networking
103
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
3. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
and the Step 3 of 3 screen displays.
4. Fill in the IP A
ddress and Subnet Mask fields for the target endpoint that can use this
tunnel, and click Next.
The VPN Wizard Summary screen displays:
To view the VPNC-recommended authentication and encryption settings used by the
VPN Wizard, click the here link.
5. Click Don
e on
the Summary screen.
The VPN Policies screen displays, showing that the new tunnel is enabled.
To Next Page
Loading...
