Virtual Private Networking
108
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Note: The pings might fail the first time. If they do, then try the pings a
second time.
Start Using a VPN Tunnel to Activate It
To use a VPN tunnel, use a web browser to go to a URL whose IP address or range is
covered by the policy for that VPN tunnel.
Verify the Status of a VPN Tunnel
To use the VPN Status screen to determine the status of a VPN tunnel:
1. Log in to the wire
less modem router.
2. On the main menu, select VPN S
tatus to display the VPN Status/Log screen.
This log shows the details of recent VPN activity, including the building of the VPN tunnel.
If there is a problem with the VPN tunnel, refer to the log for information about what might
be the cause of the problem.
• Click Re
fre
sh to see the most recent entries.
• Click Clear Log to
delete all log entries.
To Next Page
Loading...
