Network Maintenance
65
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Upgrade the Router Firmware
The wireless modem router firmware (routing software) is stored in flash memory. By default,
when you log in to your wireless modem router, it checks the NETGEAR website for new
firmware and alerts you if there is a newer version.
When uploading firmware to the wireless modem router, do not
interrupt the web browser by closing the window, clicking a link,
or loading a new page. If the browser is interrupted, it could
corrupt the firmware.
Automatic Firmware Checking Off
You can turn the automatic firmware checking off and check for firmware updates manually if
you prefer. See Manually Check for Firmware Upgrades on p
age 66. To turn off the automatic
firmware check at login:
To turn off automatic firmware checking:
1. Select Maintenance > Route
r Upgrade.
2. Clear the Che
ck for Updated Firmware Upon Log-in check box at the bottom of this
screen:
Figure 32. Checking for Firmware Updates screen
To Next Page
Loading...
