Network Maintenance
68
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Restore
To restore a configuration file:
1. Enter th
e full path to the file on your network, or click the Browse button to find the file.
2. Wh
en you have located the .cfg file, click the Restore button to upload the file to the
wireless modem router.
Upon completion, the wireless modem router reboots.
Erase
Click the Erase button to reset the wireless modem router to its factory default settings.
Alternately, press the Wireless On/Off and WPS buttons on the side panel of the wireless
modem router simultaneously for 6 seconds.
Erase sets the password to p
assword and the LAN IP address to 192.168.0.1, and enables
the wireless modem router’s DHCP.
To Next Page
Loading...
