Network Maintenance
70
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Firmware Version. This is the current software the router is using. This will change if you
upgrade your router.
Internet Port. T
hese are the current settings that you set in the Setup Wizard or Basic
Settings screen.
• MAC Addres
s. The physical address of the router, as seen from the Internet.
• IP Address. Current I
nternet IP address. If assigned dynamically, and no Internet
connection exists, this is blank or 0.0.0.0.
• Network T
ype. Indicates either Client (IP address is obtained dynamically) or None.
• IP Subne
t Mask. The subnet mask associated with the Internet IP address.
• Domain Name Server.
Displays the address of the current DNS.
LAN Port.
These are the current settings, as set in the LAN IP Setup screen.
• MAC Addres
s. The physical address of the router, as seen from the LAN.
• IP Address. LAN IP addre
ss of the router.
• DHCP. In
dicates if the router is acting as a DHCP server for devices on your LAN.
• IP Subne
t Mask. Subnet mask associated with the LAN IP address.
Modem. The
current modem status and settings are shown in this section.
• ADSL Firmware V
ersion. This is the version number of the low-level ADSL firmware.
This is contained within the router firmware.
• Modem S
tatus. The current state of the ADSL connection to your phone company.
• DownS
tream Connection Speed. The connection speed of the ADSL connection from
the phone company to your router.
• UpS
tream Connection Speed. The connection speed of the ADSL connection from your
router to the phone company.
• VPI. Th
e VPI setting entered on the ADSL Settings screen.
• VCI. The
VCI setting entered on the ADSL Settings screen.
Wireless Port. T
hese are the current settings, as set in the Wireless Settings screen.
• Name (SSI
D). SSID of the router.
• Regio
n. The location (country).
• Chann
el. The current channel in use.
• W
ireless AP. Indicates if the access point feature of the router is enabled or not. If not
enabled, the Wireless LED on the front panel is off.
• Broadca
st Name. Indicates if the router is broadcasting its SSID.
To see router performance statistics such as the number of packets sent and number of
p
ackets received for each port, click Show Statistics.
To see information about your current connection, click Connectio
n Status.
To Next Page
Loading...
