2-3
• You can cycle through the TV modes to get the best display.
• You might be able to enhance the picture quality by selecting
from additional high-definition video modes in the advanced
settings.
6. When prompted, select a language, and press OK.
7. When you hear the audio welcome tune, press OK.
If you do not hear the audio welcome message, check your volume
settings and the connections to the Digital Entertainer HD.
You will now use the Basic Setup option to finish setting up your Digital
Entertainer HD.
Note: It can take 3 or 4 seconds for each TV mode
change. In some modes you might not see a
picture on the TV. The Power LED on the
Digital Entertainer HD blinks to indicate that
a TV mode change has occurred. If you do not
see a picture after four mode changes, check
the cable connections, and verify that the TV
is on and set to the correct input.
To Next Page
Loading...
