NETGEAR EX2700 User Manual

Get Started
11
N300 WiF Range Extender
4. Click the NEW EXTENDER SETUP button.
The first time that you log in to the extender, the Create Account page displays. If the
Create Account page does not display, visit www.mywifiext.net.
5. Complete the fields and click the NEXT button.
6. Select a WiFi network to extend and click the NEXT button.
7. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button.
8. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.
Wait for the page to display a list of available extended WiFi networks, which might take
up to one minute.
9. Connect the computer or WiFi device to the new extended WiFi network using the extender
SSID and password that you created in Step 8.
Note: To connect additional devices, repeat Step 9.
10. Make sure that your computer or WiFi device is connected before you click the Continue
button.
11. Click the Continue button.

NETGEAR EX2700 Specifications

General

Type	Network repeater
Maximum transfer distance	- m
External power adapter	No
On/off switch	Yes
Product color	White
LED indicators	Power, WPS
Antennas quantity	2
Bandwidth	2.4 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WEP, WPA, WPA2-PSK
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	34 mm
Width	55 mm
Height	67 mm
Weight	98 g