Extender Network Settings
22
N300 WiF Range Extender
5. Select Do More > WiFi Coverage.
6. Select a radio button for the output power.
7. Click the SA
VE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.
If you use the button method, the WiFi device that you are trying to connect must include a
physical push button or a software button. If you use the PIN method, you must know the PIN
of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WP
A + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings page (for more information, see View WiFi Settings on page 16).
For information about using WPS to connect the extender to a WiFi network during setup,
see Use WPS to Add a Computer to the Extender’s WiFi Network on page 22.
Use WPS With the Push Button Method
For you to use the push button method to connect a WiFi device to the extender’s WiFi
network, the WiFi device that you are trying to connect must include a physical WPS button
or an onscreen WPS button that you can click.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
