NETGEAR EX2700 User Manual

Extender Network Settings
23
N300 WiF Range Extender
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
The Status page displays.
4. If your browser displays the Menu icon
, click it.
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
8. Within two minutes, go to the computer or WiFi device and press or click its WPS button.
9. T
o verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Use WPS With the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
 To add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
The Status page displays.
4. If your browser displays the Menu icon
, click it.
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).

NETGEAR EX2700 Specifications

General

Type	Network repeater
Maximum transfer distance	- m
External power adapter	No
On/off switch	Yes
Product color	White
LED indicators	Power, WPS
Antennas quantity	2
Bandwidth	2.4 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WEP, WPA, WPA2-PSK
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	34 mm
Width	55 mm
Height	67 mm
Weight	98 g