NETGEAR EX3110 User Manual

WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi security is set),
connecting with WPS automatically sets WPA + WPA2 WiFi security on the extender network and generates
a random passphrase.You can view this passphrase on the WiFi Settings page (for more information, see
View WiFi Settings on page 17).
Use WPS with the Push Button Method
For you to use the push button method to connect a WiFi device to the extender’s WiFi network, the WiFi
device that you are trying to connect must include a physical WPS button or an onscreen WPS button that
you can click.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If your extender and router use different WiFi network names (SSIDs), enter www.mywifiext.net.
• If your extender and router use the same WiFi network name (SSID), enter http://<extender’s IP
address> (for example, http://192.168.1.3).
For more information about how to find your extender's IP address, see Find Extender's IP Address
on page 40.
A login page displays.
3. Enter your admin email and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connected Devices (WPS) page displays.
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi network.
8. Within two minutes, go to the computer WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select Settings > Connected
Devices.
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must know the PIN of
the WiFi device that you are trying to connect.
Extender Network Settings
21
AC750 WiFi Range Extender

NETGEAR EX3110 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	750 Mbit/s
Product color	White

Weight and Dimensions

Width	72.5 mm
Height	64.8 mm
Weight	152 g