NETGEAR EX3110 User Manual

Find Extender's IP Address
If your extender and router use the same WiFi network name (SSID) and you want to log in to your extender
using an Android device, you must use the extender's IP address.
You can log in to your router to find your extender's IP address. If you own a NETGEAR router, use the
following example to find the extender's IP address. If you do not own a NETGEAR router, see your router's
documentation.
The following instructions might not apply to your NETGEAR router. For more
information, see your NETGEAR router's user manual.
Note
To log in to your extender and find your extender's IP address:
1. Launch a web browser from a computer or mobile device that is connected to the router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
A list of devices connected to your router displays.
5. Find your extender in the list and note your extender’s IP address.
FAQs and Troubleshooting
40
AC750 WiFi Range Extender

NETGEAR EX3110 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	750 Mbit/s
Product color	White

Weight and Dimensions

Width	72.5 mm
Height	64.8 mm
Weight	152 g