NETGEAR EX6150v2

Extender Network Settings
28
AC1200 WiF Range Extender
Use WPS With the Push Button Method
To use the button method to connect a WiFi-enabled computer or mobile device to the
extender WiFi network, the WiFi-enabled computer or mobile device that you are trying to
connect must include a physical WPS button or display an onscreen WPS button that you
can click.
 To use WPS to add a WiFi-enabled computer or mobile device to the extender WiFi
network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser
.
3. Enter www
.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the WiFi-enabled computer or mobile
device to its WiFi network.
8. Within two minutes, go to the WiFi-enabled computer or mobile device and press or click its
WPS button.
9. T
o verify that the WiFi-enabled computer or mobile device is connected to the extender’s
WiFi network, select
Settings > Connected Devices.
The WiFi-enabled computer or mobile device displays onscreen.