Factory Settings and Technical Specifications
49
AC1200 WiF Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory
Reset button or log in and click the RESET button to return the extender to these settings.
For more information, see Return the Extender to Its Factory Default Settings on page 41.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature Default Settings
Setup Wizard Enabled
WiFi communication Enabled
WiFi network names (SSIDs) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
Country/region Varies by region
Operating mode 802.11a/b/g/n/ac
Data rate Up to 300 Mbps for the 2.4 GHz network and
866.7 Mpbs for the 5 GHz network
DHCP Client enabled
Technical and Environmental Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Technical Specifications
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
Power consumption 100–240V, 50/60 Hz, 0.18A maximum
Physical specifications • Dimensions: 122 x 74 x 38 mm (4.8 x 2.91 x 1.5 in.)
• W
eight: 294 g (0.65 lb)
Environmental • Operating temperature: 32° to 140°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity
, noncondensing
Interface • Local: 10BASE-T
, 100BASE-TX, 1000BASE-T, RJ-45
• 802.1
1ac, 802.11n, 802.11a, 802.11g, 802.11b
To Previous Page
Loading...
Need help?
General
