Monitor and Maintain the Extender
40
AC1200 WiF Range Extender
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
ļ To restore the extender configuration settings:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser
.
3. Enter www
.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > Other.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6150v2.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
8. Click the REST
ORE button.
A confirmation pop-up page displays.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
To Next Page
Loading...
Need help?
General
