Extender Network Settings
34
AC1200 WiF Range Extender
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login page displays.
c. Enter your email address and password.
The Status page displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays the MAC addresses and virtual MAC addresses
for WiFi-enabled computers and mobile devices that are connected to the extender
network.
6. On the router, add the extender’s virtual MAC address and the virtual MAC addresses of all
devices that are connected to the extender network to your router’s MAC filter table.
7. Enable the router’s MAC filter, WiFi access control, or ACL.
To Next Page
Loading...
