FS728TP Smart Switch Software Administration Manual
Configuring Switching Settings 4-7
v1.1, September 2009
4. Click APPLY to update the device.
LAG Membership
The Basic LAG Membership screen allows network managers to assign ports to LAGs.
To assign ports to LAGs:
1. Click Switching > LAG > Basic > LAG Membership. The Basic LAG Membership screen
displays:
The Basic LAG Membership screen contains the following fields:
• LAG ID – Select the LAG ID.
• LAG Name – Displays the user-defined LAG name.
• LAG Type – Select the LAG type. The possible field values are:
– Static – Indicates the LAG is configured manually.
– LACP – Indicates the LAG is configured dynamically.
2. Select the LAG ID and LAG Type.
Figure 4-3
To Next Page
Loading...
