NETGEAR FS728TP - MAC ACL

FS728TP Smart Switch Software Administration Manual
6-20 Managing Security
v1.1, September 2009
• “IPv6 ACL”
• “IPv6 Rules”
• “IPv6 Binding Configuration”
• “Binding Table”
MAC ACL
The MAC Configuration screen allows a MAC Based ACL to be defined.
To view or rename MAC Based ACLs:
1. Click Security > ACL > MAC ACL. The MAC Configuration screen displays:
The MAC Configuration screen contains the following fields:
MAC ACL
• Current number of ACL – Displays the current number of user-defined ACLs.
MAC ACL Table
• Name – Enter the user-defined MAC based ACL name.
Figure 6-9