FS728TP Smart Switch Software Administration Manual
4-44 Configuring Switching Settings
v1.1, September 2009
The Advanced IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
• Status – Select the IGMP Snooping status on the device. IGMP Snooping is operational if
both the Status and Bridge Multicast Filtering fields are enabled. The possible field values
are:
– Disable – Disables IGMP Snooping on the device. This is the default value.
– Enable – Enables IGMP Snooping on the device.
• Bridge Multicast Filtering Status – Select the bridge Multicast filtering status on the
device. The possible field values are:
– Disables – Disables Multicast filtering on the device. If Multicast filtering is disabled,
Multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default
value.
– Enables – Enables Multicast filtering on the device.
Interface Settings
• VLAN ID – Displays the VLAN ID.
Figure 4-24
To Next Page
Loading...
