NETGEAR FS728TP - Alarms

FS728TP Smart Switch Software Administration Manual
7-22 Monitoring the Switch
v1.1, September 2009
The RMON Events Log screen contains the following fields:
• Event – Displays the RMON Events.
• Log Number – Displays the log number.
• Log Time – Displays the time when the log entry was entered.
• Description – Displays the log entry description.
2. To refresh the RMON Events Log screen, click REFRESH.
Alarms
The RMON Alarms screen contains fields for setting network alarms. Network alarms occur when
a network problem or event, is detected. Rising and falling thresholds generate events.
To set RMON alarms:
1. Click Monitoring > RMON > Advanced > Alarms. The RMON Alarms screen displays:
Figure 7-11