FS728TP Smart Switch Software Administration Manual
2-10 Introduction to the Web Browser Interface
v1.1, September 2009
Quick Boxes
Quick Boxes provide users with flexibility in configuring VLANs for all ports or LAGs. Clicking
on the quick box toggles between the various options that exist for this field. A quick box appears
to the right of the arrow on the left-hand side of the gold button. The following example displays
quick box basic usage options.
To mark or unmark all ports:
1. Click on the quick box that appears to the left of the Port gold button. A T appears in the
quick box. This sets all ports as Tagged.
2. Click on the Port gold button to display the ports, which are now all Tagged.
3. Click again on the Port quick box, and a U appears in the quick box and in all the port boxes,
marking the ports as untagged.
Figure 2-11
Figure 2-12
To Next Page
Loading...
