NETGEAR FS728TP - Page 72

FS728TP Smart Switch Software Administration Manual
Managing System Settings 3-35
v1.1, September 2009
Trap Filter Name
The SNMPv3 Trap Filter Name screen permits creating filtering names based on OIDs. Each OID
is linked to a device feature or a portion of a feature. The SNMPv3 Trap Filter Name screen also
allows network managers to filter notifications.
To define the SNMPv3 Trap Filter Name:
1. Click System > SNMP > SNMPv3 > Trap Filter Name. The SNMPv3 Trap Filter Name
screen displays:
The SNMPv3 Trap Filter Name screen contains the following field:
• Filter Name – Enter the trap filter name.
2. Select the trap filter entry.
3. Enter the trap Filter Name in the provided field in the first row.
4. Click APPLY to update the device.
To add a new trap filter name:
1. Click System > SNMP > SNMPv3 > Trap Filter Name. The SNMPv3 Trap Filter Name
screen displays.
Figure 3-19