FS728TP Smart Switch Software Administration Manual
4-2 Configuring Switching Settings
v1.1, September 2009
The Port Configuration screen contains the following fields:
• Port – Displays the port number.
• Port Description – Enter a user-defined port description.
• Status – Select the port’s operational status. The possible field values are:
– Up – Indicates the port is operational.
– Down – Indicates the port is not operational.
– Suspended – Indicates the port is suspended either through the locked port security
option
or through the Access Control List configurations.
• Reactivate Suspended – Select the reactivation status for a port disabled through the
locked port security option. The possible field values are:
– Enable – Enables reactivation.
– Disable – Disables reactivation.
• Port Speed – Select the data transmission rate for the port. The port type determines
which speed setting options are available. Port speeds can only be configured when auto
negotiation is disabled. The possible field values are:
Figure 4-1
To Next Page
Loading...
