NETGEAR FVS336Gv3 - Page 320

Protect Your Network
320
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Address Filter > IP/MAC Binding.
The IP/MAC Binding screen displays the IPv4 settings.
7. In the IP/MAC Bindings table, click the Edit button for the IP/MAC binding that you want to
change.
The Edit IP/MAC Binding screen displays.
8. Change the settings.
You can change the MAC address, IPv4 address, and logging status. For more
information about the settings, see
View and Set Up an IPv4/MAC Binding on page 318.
9. Click the Apply button.
Your settings are saved. The modified IP/MAC binding displays in the IP/MAC Bindings
table on the IP/MAC Binding screen.
Remove One or More IPv4/MAC Bindings
The following procedure describes how to remove one or more bindings between MAC
addresses and IPv4 addresses that you no longer need.
 To remove one or more bindings between MAC addresses and IPv4 addresses:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.