USB Port
The switch provides one USB 2.0 port that lets you upload firmware, upload or download (back up) the
configuration settings file, and download a memory dump (for debugging purposes) using a USB storage
device.
The USB storage device that you attach to the USB port must comply with the following requirements:
• The USB device must support USB 2.0.
• The USB device must support the FAT32 or VFAT file type.The NTFS file type is not supported.
Console Port
The switch provides one micro USB port for console access and debug purposes. Use this port only as
directed and assisted by technical support.
Multifunction Reset Button
The switch provides a recessed multifunction Reset button on the back panel so that you can either restart
the switch, reset the switch to the most recently saved cloud-managed configuration, or return the switch
to its factory default settings, causing all custom settings to be erased.The factory default settings function
of the Reset button is available only after you use the NETGEAR Insight app to remove the switch from
your network.
To restart or reset the switch or return the switch to its factory default settings:
1. Insert a device such as a straightened paper clip into the opening.
2. Do one of the following:
• Restart the switch. Press the Reset button for about two seconds. (Do not press the button for
more than five seconds!)
The switch restarts but retains its custom settings. During this process, the Power LED lights amber.
• Reset the switch to the most recently saved cloud-managed configuration. Press the Reset
button for at least five seconds.
The switch restarts and returns to the most recently saved cloud-managed configuration. During
this process, the Power LED lights amber.
• Return the switch to its factory default settings. After you use the NETGEAR Insight app to
remove the switch from your network, press the Reset button for at least five seconds.
The switch restarts and returns to its factory default settings. During this process, the Power LED
lights amber.
Hardware Overview
16
Insight Managed 28-Port Gigabit Ethernet (PoE+) Smart Cloud Switch
To Next Page
Loading...
Need help?
General
