USB Storage
51
N300 Wireless Gigabit Router with USB JNR3210
• There are two user accounts: admin and guest. The password for admin is the same one
that you use to access the router. By default, it is password. The guest user account has
no password.
• On the FTP site, the person receiving the files should use the guest user account and
enter any password (FTP requires that you type something in the password field).
• Be sure to select the FTP (via Internet) check box in the USB Storage Advanced
Settings screen. This option supports both downloading and uploading of files.
Note: You can enable the HTTP (via Internet) option on the Advanced
USB Storage screen to share large files. This option supports
downloading files only.
Basic Settings
You can view or edit basic settings for the USB storage device attached to your router.
You can access this feature by selecting Basic > ReadySHARE, or Advanced > USB
Storage > ReadySHARE.
The USB Storage (Basic Settings) screen displays:
By default, the USB storage device is available to all computers on your local area network
(LAN).
The ReadySHARE print feature allows you to share a printer that you connect to the USB
port on your router. To use the ReadySHARE print feature on a Windows PC, you need to
use the NETGEAR USB Control Center utility. For information about this feature, see
Chapter 6, ReadySHARE Printer.
To Next Page
Loading...
Need help?
General
