USB Storage
56
N300 Wireless Gigabit Router with USB JNR3210
Specify Approved USB Devices
For more security, you can set up the router to share approved USB devices only. You can
access this feature from the Advanced Setup menu on the Advanced tab.
To set up approved USB devices:
1. Select Advanced > Advanced Setup > USB Settings. The following screen displays:
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. To add an approved USB device, select it from the Available USB Devices list, and then click
Add.
4. Select the Allow only approved devices check box.
To Next Page
Loading...
Need help?
General
