Hardware Setup
8
N300 Wireless Gigabit Router with USB JNR3210
Unpack Your Router
Open the box and remove the router, cables, and installation guide.
Power adapter
Ethernet cable
N300 Wireless Gigabit Router
with USB
Figure 1. Check the package contents
Your box should contain the following items:
• N300 Wireless Gigabit Router with USB JNR3210
• AC power adapter (plug varies by region)
• Category 5 (Cat 5) Ethernet cable
• Installation guide with cabling and router setup instructions
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Position Your Router
The router lets you access your network from virtually anywhere within the operating range of
your wireless network. However, the operating distance or range of your wireless connection
can vary significantly depending on the physical placement of your router. For example, the
thickness and number of walls the wireless signal passes through can limit the range. For
best results, place your router:
• Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your wireless devices.
• So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
To Next Page
Loading...
Need help?
General
