ReadySHARE Printer
63
N300 Wireless Gigabit Router with USB JNR3210
• You can set the value for the default time-out time from the Tools > Configuration
screen
.
• The USB Control Center utility must be running for the computer to be able to print to
the USB printer attached to the router. If you exit the utility, printing does not work.
• Some firewall software, such as Comodo, blocks the ReadySHARE Print utility from
accessing the USB printer. If you do not see the printer in the utility, you can disable
the firewall temporarily to allow the utility to work.
7. If your printer supports scanning, make sure that the printer is in the Available state, and
click the Network Scanner button. This activates the Scanner window so you can use the
printer for scanning
.
To Next Page
Loading...
Need help?
General
