NETGEAR M4100 Series Hardware Installation Guide

Technical Specifications
30
NETGEAR Managed Switch
Security • Radius
• TACACS+
• 802.1x
• MAC filter
• Port security
• Protected port
• Private group
• Storm control
• DHCP snooping
• IP source guard
• Dynamic ARP inspection
• MAC ACL (inbound)
• IP ACL (inbound)
Address database size 16 K MAC addresses per system
10/100/1000 buffer
memory
Max support 1.5 MB buffer memory
Performance • Forwarding modes: Store-and-forward
• Network latency:
< 3.91 us for 64 bytes for 1000 Mbps transmission
< 10.194 us for 64 bytes for 100 Mbps transmission
Addressing 48-bit MAC address
Environment Operating:
• Temperature: 32° to 122°F (0° to 50°C)
• Humidity: 90% maximum relative humidity, noncondensing
• Altitude: 10,000 ft (3,000 m) maximum
Storage:
• Temperature: –4° to 158°F (–20° to 70°C)
• Humidity: 95% maximum relative humidity, noncondensing
• Altitude: 10,000 ft (3,000 m) maximum
Electromagnetic
emissions and
immunity
CE mark, FCC Part 15 Class A, VCCI Class A, Class A EN 55022 (CISPR 22) Class A, Class A
C-Tick, EN 50082-1, EN 55024
Safety CE mark, UL listed (UL 1950)/cUL, CB, CCC
Security • Radius
• TACACS+
• 802.1x
• MAC filter
• Port security
• Protected port
• Private group
• Storm control
• DHCP snooping
• IP source guard
• Dynamic ARP inspection
• MAC ACL (inbound)
• IP ACL (inbound)
Table 7. Technical specifications (Continued)
Feature Description

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply