EasyManua.ls Logo

NETGEAR MA521 - Page 6

NETGEAR MA521
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Follow the on-screen instructions to install the driver for the MA521 802.11b Wireless
PC Card.
For Windows 98/Me users, once the [Please insert the disk labeled Windows 98/Me
CD-ROM, and then click OK] window appears, enter the path corresponding to the
appropriate drives and click OK. Usually these files can be found at C:\Windows or
C:\Windows\System.
For Windows 2000 users, a Digital Signature Not Found message may appear. Click
Yes to proceed.
For Windows XP users, a Windows Logo Testing Not Found dialog box may appear.
Click Continue Anyway to proceed.
4. Click Finish to complete the installation.
Verify the Driver Installation
It is a good idea to confirm that the MA521 802.11b Wireless PC Card has been properly
installed. Follow the instructions that apply to your computer system:
1. From the Windows desktop, right-click My Computer.
2. Click Properties.
3. Open Device Manager:
Windows 98/Me users Select the Device Manager folder tab.
Windows 2000/XP users Select the Hardware folder tab, and click on the Device
Manager button.
4. Double-click Network Adapters. There should be no yellow exclamation mark or red cross
icon on the NETGEAR MA521 802.11b Wireless PC Card selection, as shown here.
5

Other manuals for NETGEAR MA521

Related product manuals