NETGEAR MS108EUP User Manual

Contents
Chapter 1 Hardware
Related documentation.......................................................................8
Switch package contents.....................................................................8
Supported switch models....................................................................8
LEDs........................................................................................................8
Switch label.........................................................................................10
Safety instructions and warnings......................................................11
Chapter 2 Install and Access the Switch in Your Network
Set up the switch in your network and power on the switch.........15
Discover the switch's IP address to access its device UI................15
Discover the IP address and access the switch..........................16
Use the NETGEAR Switch Discovery Tool to discover the
switch's IP address and access the device UI........................16
Assign a fixed IP address to the switch.......................................17
Set a fixed IP address for the switch through a network
connection..................................................................................18
Assign a fixed IP address by connecting directly to the switch
off-network.................................................................................19
Change the language of the device UI............................................21
Change the switch password............................................................21
Register the switch..............................................................................22
Chapter 3 Optimize the Switch Performance
Set the quality of service mode and port rate limits......................24
Use port-based quality of service and set port priorities..........24
Use 802.1P/DSCP quality of service............................................25
Manage broadcast filtering and set port storm control rate
limits.................................................................................................26
Manage individual port settings.......................................................27
Set rate limits for a port.................................................................27
Manage flow control for a port.....................................................28
Change the speed for a port or disable a port..........................29
Add or change the name label for a port...................................30
3

NETGEAR MS108EUP Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	2.5G Ethernet (100/1000/2500)
Basic switching RJ-45 Ethernet ports quantity	8
10G support	No
Number of VLANs	64
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
Virtual LAN features	Port-based VLAN, Tagged VLAN
Copper ethernet cabling technology	100BASE-T, 1000BASE-T
Jumbo frames	12000
MAC address table	16000 entries
Packet buffer memory	1.5 MB
DHCP features	DHCP client
Queue scheduling algorithms	Strict Priority Queue (SPQ), Weighted Round Robin (WRR)
Number of multicast groups filtered	128
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Total Power over Ethernet (PoE) budget	230 W
Power source	PoE
Mean time between failures (MTBF)	373644 h
Certification	CE FCC 15 B CE/EN55032/24 CSA VCCI ACMA KC CCC BSMI
Product color	Gray
Housing material	Metal

Weight and Dimensions

Depth	140 mm
Width	210 mm
Height	40 mm
Weight	900 g